GODOX FLASH WITSTRO AD400 PRO

The hallmark of the AD400Pro TTL is very high stability and repeatability throughout the entire flash power regulation range. In a situation where high precision and uniformity of light is required, the user can activate the Color Mode (Color Mode). In this configuration, no matter what wattage is set, the lamp will maintain the color temperature in the +/- 75K range. When using standard mode, the jitter range is defined as 5600 +/- 200K. In addition, the lamp is capable of emitting long bursts of flashes regardless of the operating mode and can be recharged extremely quickly.

After firing the flash at full power, the AD400Pro TTL is ready in 0.9s. Due to the fact that the flash duration is short, the flash will also come in handy when you need to freeze fast-moving objects in your photos. The minimum flash duration of the AD400Pro TTL lamp is only 1/12340s (for t0.1 and at 1/256 power) which is sufficient in the vast majority of situations.

The lamp is equipped with a newly designed flash tube that allows efficient use of all available light modifiers. It is protected against mechanical damage by a glass cover. Its front is made of glass with a milky white surface, which translates into a uniform distribution of light. Torch replacement is possible and can be done without additional tools.

AD400Pro TTL is equipped with a LED modeling light with a maximum power of 38W, which is equivalent to a halogen bulb with a power of about 500W. This illumination can be manually controlled or operated in proportion to the flash power set.

AD400Pro TTL is powered by a 2.6Ah lithium-ion battery, which when fully charged gives you up to 370 flashes at full power. A depleted battery can be easily replaced with another, and charging takes about 3 hours (using the charger included in the set).

The lamp is equipped with a Godox-type light modifier bracket, but you can also use Bowens system accessories thanks to the included adapter.

The lamp housing is made of high quality plastic. The large LCD screen is easy to read even in bright ambient light. The mounting of the light modifiers and the tripod handle are made of metal, which guarantees a high resistance of the structure. The handle allows continuous adjustment of the tilt angle of the lamp and is strong enough to hold large softboxes (up to 120 cm).

Principal functions:

• compatible with Canon / Nikon / Sony / Olympus / Fujifilm / Pentax (with System X)
• Integrated System X receiver for remote control and flash firing
• the maximum flash power is 400W
• 72m guide number (ISO100)
• equipped with TTL (auto), manual (M), and strobe (multiple) modes
• Wide and fine adjustment of flash energy in the range of 8 apertures in 1/10 steps
  color priority mode in which the bar temperature fluctuations between flashes are within the range of 5600 K ± 75 K
• Very short charging time: only 1 second at full flash power
• powered by a replaceable lithium-ion battery with a capacity of 2.6Ah (21.6V)
• up to 390 full power flashes on a single battery charge
• can be powered from the mains via an optional adapter
• High-Speed ​​Sync up to 1/8000s
• extremely short flash durations of up to 1/12340 s (t0.1, @ 1/256)
• LED modeling light with a maximum power of 30W, which can be used proportionally to the energy of the flash or in manual mode
• the possibility of triggering the flash by means of a photocell or by means of a synchronization socket (Jack 3.5 mm)
• active cooling
• Large, easy-to-read LCD display
• delivered with a silver reflector
• equipped with Godox type light modifier mount
• Supplied with adapter for Bowens system modifiers
• Light and compact housing made of high-quality plastic
• Metal tripod handle with smooth tilt angle adjustment
• low weight (only 2.1 kg without reflector and flash tube)

The kit includes:

• Godox AD400Pro TTL Lamp
• flash tube
• drums
• charger
• AD400 Pro spotlight
• user manual
• bag
• original packaging